SCP

Design

Axially spilt case pump mounted on a baseplate.

Application

» Pumping heating water in accordance with VDI 2035 water/glycol mixtures, cooling/cold water and secondary hot water
» Applications in municipal water supply, irrigation, building services, general industry, power stations, etc.

Type key
Example	SCP 200/250HA‐110/4
SCP	Axially split case pump
200	Nominal diameter of pressure port
250	Nominal diameter of impeller
HA	Hydraulics type A
Hb	Hydraulics type B
HS	Single suction impeller
DS	Two-stage pump
DV	Double volute
110	Rated motor power P2 [kW]
4	4-pole motor

Special features/product advantages

• Easy maintenance (without removing the pressure or suction pipes)
• Low NPSH value (thanks to double suction impeller)
• Longer service life (load is distributed to bearings)
• Both directions of rotation are possible (clock-wise and anti-clock-wise)
• Permanently lubricated bearings

Description/Design

• Centrifugal axially split case pump, available in single-stage and two-stage design.
• Delivered as complete unit (pump with coupling, coupling protection, motor and baseplate) or without motor or only pump hydraulics.
• Shaft seal with mechanical seal or stuffing box packing
• 2-pole, 4-pole and 6-pole motors; IE2 standard (IE3 on request)
• Cast baseplate; SCP 200 and higher with welded steel frame (depending on the motor power and dimensions)

Materials

• Pump housing: EN-GJL-250
• Impeller: G-CuSn10
• Shaft: X12Cr13

Scope of delivery

• Pump
• Installation and operating instructions

Options

• Other motor versions on request
• Higher volume flow up to 17 000 m3/h as special version
• Special motor (6000V, 10 000 V etc.)
• Special construction
  • Impeller: Bronze, grey cast iron, stainless steel
  • Housing: grey cast iron, spheroidal cast iron
• Cyclone separator (for flushing the gasket)